SubCone Isolation Feet - Improve Subwoofer and Speaker Performance, can Sustain up to 165lb (4-Pack) Non-Adhesive

This was what I needed to make more space on my table. The reason is that I have the JBL 1300X soundbar and it is a beast of size even though I don't have the side speakers installed on the bar because I have them on the back of my table for the Dolby Atmos sound. This helped me to be able to put the soundbar a little further back since the monitor, a Corsair brand Xeneon Flex 45, takes up a lot of space on its legs. I recommend it if you need to raise your soundbar.

I was looking for something to raise my center channel speaker off of the TV stand. These were the perfect solution: very sturdy, not too tall, and a small footprint.

Perfect for my subwoofer

These insulation feet are exactly what I was looking for, for my use case. I bought a meshroom S itx case and the monitor cables connect to the GPU at the bottom of the case. They elevate my PC enough to provide clearance for cables without taking up any additional space. While they do not stick (3m tape doesn't stick), they don't move around and allow you to move them easily if needed.

Very good product well made and works well

Well made but tough to mount as they are made of silicone, will support a heavy speaker no problem. Old time Duco was able to stick them, two sided tape didn't adhere at all.

I used these to lift my CD changer off the countertop. I placed one under each of the feet on the player and it works great. Well made, sturdy with just enough give. Now I don't have to stretch as much to reach, and it doesn't skip nearly as much walking on my hard floors! Highly recommended.

Without these I was chasing the subwoofer across the tile floorat the end of every song. Now I just enjoy listening to the music. Well worth the investment.

Placed them on the bottom of my Sonos sub. They work great.

These made my speakers too unstable due to the narrowness and height of the speakers.I think with threaded inserts or attaching with an adhesive, who make these feet more universal and useable.Unfortunately, due to the materials used to make the feet, no adhesive will stick to them.

Sturdy and easy to install--just place under subwoofer. getting a much tighter bass sound bu getting the speaker isolated from my hardwood floor.

These work fairly well for reducing vibrations from my subwoofers. Only thing is I wish they were a little larger, as it’s difficult to position them without them rolling under with any movement

I purchased this product based on the posted reviews. I was looking for something to improve the quality of my Sony SW3 subwoofer. Even with the “decoupling “ I notice absolutely no difference in bass tone.

I wanted to raise my center channel about an inch and these did the job perfectly. Can't speak for their sound isolation properties, but they feel extremely solid, well designed, and use high quality materials. I'll try these on my subwoofers some day.

I used it for my Klipsch Promedia 2.1 Subwoofer, and it completely changed the base quality(in a good way!)The feet can be a little awkward to place, but I appreciate the non-adhesive style for future resale value with the potential to damage the finish of the sub.Before I added these feet, the Klipsch had a very distinct BOOM to the base. Most reviews describe it as too boomy, and I agree. With these feet, however, the boominess is completely gone, and the base lows are significantly cleaner and all rattling is removed.

Hose up on my subwoofer great love the size

Good subwoofer support. No rubber smell!

My sub-woofer was rattling the apartment walls/floor and my neighbor was complaining. But I like my bass. Put these babies underneath the sub-woofer's legs and the improvement was huge. I can't guarantee your walls won't shake anymore, but they improved things enough that I get my bass and no more complaints from the neighbor.

I had built a home theater subwoofer with an extremely high exertion down firing passive radiator, and these things were amazing. Gave me the height I needed and kept it from dancing. Worth twice the money

These are fantastic when coupled with DGJM 50PCS Double Sided Adhesive Pads for Mounting, 2-3/8inch Two Sided Pre-Cut Square Tape. The two-sided adhesive works perfectly with these heavy duty rubber feet. I purchased a very heavy and expensive Velodyne (used) that did not come with feet. These are more than capable of supporting its weight. I applied the adhesive tape squares first. I would not even call this "tape." There is good thickness to the adhesive. And it's potent. I flipped the subwoofer so the bottom side was up. Use good pressure between the feet and the cabinet to get a good bond. I put my weight into it. These are absolutely excellent when used with the above adhesive. Absolutely met my expectations.

Oh my goodness huge difference in bass clarity in my McIntosh LS 360’s. I just slid them under leaving the stock feet on and what a difference. I’ll look into buying more for my audio gear

I was just about ready to throw away my rel subwoofer that I had paid about $600 for. The base feet are hard and I was hearing a buzzing or humming distortion sound whenever the movie base was very low or strong. I started looking for any remedy that might help with those issues. People were suggesting foam or rubber pads that would allow a realistic, full base without any humming distortion. I looked at these pads and after reading the reviews decided to try them. The results are fantastic! I'm getting all the expected performance out of the subwoofer without any humming or buzzing issues. Give them a try, you'll be pleased with the difference.

No more neighbours complaining, makes a sound stay in place. It enhances the base to this proper levels.

Work and look great!

Impressive improvement in sound

Excellent product A+++

I love that the simplicity of this design and material used is adequate to elevate my speaker, eliminate any vibration, and not diminish the sound.

They’re just big hunks of rubber. They do a good job of holding up very heavy power amps I have sitting on 1 inch think plexiglass shelves so you can see them through the glass... but they have no problem holding a 600 watt McIntosh monobloc which weighs well over 100 lbs. I bought another set because I plan on using this on another system.